Commercial & Industrial Products

CF Partition Wall

CF Partition insulated metal wall panels are ideal for interior wall applications. They offer an economical design for interior walls, ideal for commercial and industrial designs. Our interior partition wall panels are available with an exterior façade in either of the lightly corrugated profiles of Mesa with 1/8” deep planks or Light Mesa with 1/16” deep planks. The corrugation in the profile provides added strength on both faces and offers symmetry between rooms. Designed to be the most economical choice for interior, simplify installation with these commercial and industrial wall partitions as they create symmetry outside and inside room-to-room.

Partition panels are also ideal for cold storage applications, including dry goods warehouses, cooler and freezer buildings, food processing facilities, and all temperature-controlled environments. This panel is commonly used to achieve and maintain temperature control and insulation values that are critical. Our representatives are available to find the right option for your needs. Contact us below to learn more!

The table indicates PUR values. For PIR values, please refer to the data sheet available under the Literature tab.

Coverage Width	44″, 44.4″
Thermal Values – R-Value & U-Factor	*U-Factor (BTU/h-ft2Fahrenheit) Panel Width: 44.4″ 2″ = 0.059 2.5″ = 0.046 3″ = 0.039 4″ = 0.029 5″ = 0.023 6″ = 0.019 R-Value (hft2F/BTU)** Panel Width: 44.4″ 2″ = 17.5 2.5″ = 21.9 3″ = 26.2 4″ = 35.0 5″ = 43.7 6″ = 52.5
Exterior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga~.
Interior Face	G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga~.
Finishes	Fluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester
Joint	Offset double tongue-and-groove
Core	Foamed-in-place, zero ozone depleting (zero ODP) FM Class 1 approval.
Length	Non-Directional Embossed 8′-0″ to 52′-0″ Vertical Unembossed 8′-0″ to 40′-0″ Vertical

FM Approved Class 1 with no height restrictions.

*Available only from Nevada plant.

~22 Ga not available for stainless steel.

**Based on ASTM C518, ASTM C1363 and thermal modeling