top of page
c83b03_8920cdded5874480a37b6c576e7a98fa (1)_edited.png

Commercial & Industrial Products

BW Stretch System™

BW Stretch System™

BW Stretch System™

The BW Stretch System™ is the ultimate vertical backup wall system, providing superior air, water, thermal and vapor protection in an all-in-one barrier component. It can be vertically installed with a variety of exterior rainscreen systems and can span up to 6 ft. o.c. This unique insulated metal panel stretch span wall system introduces new standards when it comes to cost savings, design integrity, and sustainability. The BW Stretch System eliminates the need for multiple work crews as it is easily and quickly installed in a single step. The stretch span wall system not only expedites close-in and dry-in building times, but rather reduces the likelihood of improper installation as well.


Coverage Width

30”, 36”

Thermal Values – R-Value & U-Factor

U-Factor (BTU/hft2*fahrenheit)

Panel Width: 36″

2″ = 0.063

2.75″ = 0.046

4″ = 0.034


R-Value (h*ft2*F/BTU)

Panel Width: 36″

2″ = 16.7

2.75″ = 23.0

4″ = 33.5

Finishes

Exterior Face: G-90 galvanized steel in 22 Ga. with epoxy primer finish


Exterior Profile: No profile, unembossed


Interior Face: G-90 galvanized in 26 Ga. with epoxy primer finish


Interior Profile: Shallow Planked, nominal 3/64” deep, unembossed

Joint

Double tongue-and-groove

Core

Foamed-in-place polyisocyanurate 

Length

12’-0” or 20’-0” Vertical

Thickness

2”, 2 ¾”, 4”

Coverage Width

30”, 36”


bottom of page